LOOKAH Seahorse Max | LOOKAH (2024)

How to use the Seahorse Max Dab Pen

LOOKAH Seahorse Max | LOOKAH (1)

How To Use

The Seahorse Max dab Pen is the latest generation of dab devices in the Lookah Seahorse range. Like the Seahorse and Seahorse Pro, it can be used with quartz or ceramic tips. More on the difference between these coils later.

1. Before you start dabbing with the Seahorse Max, add a small amount of water to the Max Glass, just enough to cover the percolation holes.

To start dabbing with the Seahorse Max, you first need to turn the device on.

2. Remove the tip cover, and then press the power button five (5) times in quick succession within 2 seconds to turn the device on.

Once the dab pen is on, you can select the temperature level.

There are three temperatures to chose from low, medium, or high—each with a different color light to identify it.

3. To cycle through the three temperature modes press the power button two (2) times within 0.8 seconds.

Low 3.2V (blue), medium 3.6V (purple), and high 4.1V (white)

The higher the temperature, the more vapor will be produced, but also the more likely you are to lose some of the flavors as the terpenes.

Manual Mode

1. Once the temperature has been selected, press and hold the power button to use the device. When the tip of the coil is hot, bring it into contact with the concentrate. A 45-degree angle between the tip and the concentrate is advisable. Please don't press the tip of the coil against a hard surface or concentrate as this can damage it. You can press and hold the power button to dab for up to 20 seconds in one go.

Note: Please hold the button for 3 to 5 seconds for the coil to heat up before taking the first hit of a session.

Auto Mode

The auto mode heats the coil to the set temperature and keeps it there for up to 30 seconds of dabbing.

1. Start the auto mode by pressing the power button three (3) times within 1.5 seconds.

2. In auto mode, the device will preheat for up to 15 seconds with the indicator light flashing.

3. Once the set temperature has been reached, the light will stop flashing, and the tip temperature will be maintained for 30 seconds.

4. Bring the hot tip of the coil into contact with the concentrate to start dabbing. A 45-degree angle between the tip and the concentrate is advisable.

1. To exit the auto mode, press the power button three (3) times within 1.5 seconds. The device will return to standby mode.

How to clean the Seahorse Max.

How to clean the coil.

To clean the coil, remove the tip cover and then turn on the Seahorse Max. Select the highest temperature setting.

Run the auto mode in the highest temperature setting 2 to 3 times. This will heat up the tip of the coil and burn off much of the remaining residue.

How to clean the base unit.

The Seahorse Max comes with a cleaning brush. To clean the base, remove the seahorse max glass. Unscrew and remove the seahorse max coil tip.

Apply a little alcohol cleaner to the brush and insert it through the airway. Twist the brush to loosen and remove any concentrate buildup in the airway.

How to clean the glass.

LOOKAH Seahorse Max | LOOKAH (2)

The Seahorse Max glass is the same as the glass on the Unicorn E-rig and can be cleaned in the same way.

The Seahorse glass can be cleaned like any other glass percolator.

1. Remove the glass top from the base of the unit.

2. Remove the glass from the magnetic ring.

3. With your hand, cover the holes at the bottom of the percolator.

4. Add a little isopropyl alcohol and coarse salt into the percolator through the hole at the top.

5. Cover the top of the percolator and shake well for 5 - 10 minutes.

6. If there is hard to remove residue, you can soak the percolator in hot water or isopropyl alcohol.

7. Pour out the salt and isopropyl alcohol.

8. Rinse thoroughly with warm water.

Difference Between the Lookah Seahorse Max Coils

The Seahorse Max uses the same coils as the Seahorse and Seahorse Pro. There are two seahorse coils or tips to choose from: quartz and ceramic. Both types of coils seahorse coils are available from the Lookah webpage; you may also find them sold in smoke shops and by online resellers.

LOOKAH Seahorse Max | LOOKAH (3)

Quartz

The quartz coils are porous and tend to offer the best flavor; however because they are porous, they can be easy do damage, especially if you press down on them with any force. It's best to use the edge of the tip to gently dab into the concentrate or to use a dab tool to apply a little concentrate to the hot tip.

Ceramic

The ceramic tips have two ceramic cylinders parallel on the end of the tip; these heat up faster than the quartz coils and tend to be more robust, however sometimes, due to their fast heating, they don't let the flavor through as well as the quartz.

LOOKAH Seahorse Max | LOOKAH (2024)

FAQs

Is the Lookah Seahorse worth it? ›

The Lookah Seahorse Pro Plus is an uncommon experience that some users will find great use in. With that said, its cool operation method comes with some difficult problems to tackle and Lookah hasn't cracked the code yet. While the device does work, it may not be worth the drawbacks that come with its design.

How long does it take to charge a seahorse Max? ›

The charge time of the Lookah Seahorse Pro Plus is about an hour from 0 to 100%.

Can you use shatter in a Lookah seahorse? ›

Shatter is my favorite to smoke with the Seahorse Pro Plus. No more trying to break it up and watch the shatter accidentally fly across the room. All I need to do is heat up my Seahorse Pro Plus and gently touch it to the surface of the oil. My favorite thing to do with shatter is to make holes like swiss cheese.

Can you put vape juice in a Lookah? ›

The Lookah seahorse is not only a wax pen, but also fits all 510 cartridges so you can smoke oil such as e-juice through it as well, it has a 1.2 Ω resistance.

How often should I change my seahorse coil? ›

Whether you like ceramic, quartz, or a bit of both, these set of five replacement coils for your Seahorse Pro Vaporizer are you ton o keep your dabs tasing fresh and full terpenes. Depending on usage, you should be changing your coils every 1-2 months, so having a set of five or ten around sounds like a perfect idea.

What is the best seahorse for beginners? ›

As a rule, you will find that captive-bred-and-raised seahorses are much easier to feed, have far fewer health problems, and enjoy greater longevity in the aquarium than their wild-caught counterparts. Good candidates include Hippocampus erectus, H. reidi, H.

What is the difference between seahorse and seahorse pro plus? ›

Another way this device is more convenient than its predecessor is the new and improved coil. The Seahorse Pro Plus coil is more durable, uses a more porous quartz tip, and features a clear glass casing.

How long does a Lookah Seahorse battery last? ›

The battery is 650mAh which should see you through 10 to 15 dabs (depending on the mode and temperature settings) for each full charge. When it comes to charging, the Seahorse Pro Plus has a type C USB port, so there is no faffing with getting the cable the right way around.

How to use lookah dragon egg? ›

How to Use the Dragon Egg E-Rig:
  1. Step 1: Unscrew the chamber with the bubbler and fill it about one-third full with water. ...
  2. Step 2: Open the flip cap that is held by a magnet. ...
  3. Step 3: Quickly press the power button five times within two seconds to turn on the Dragon Egg.
Apr 17, 2024

Why is my seahorse blinking 10 times? ›

Low battery charge

The battery is the vape pen's power source, so you can expect to see the LED indicator blinking when it has run out. Once the charge is too low to allow proper vape, it blinks 10 times.

Why does my Lookah Seahorse taste burnt? ›

If the coils in your vape pen are old and worn out, they may not vaporize the e-liquid properly, leading to a burnt taste. Every coil has its own lifespan, so remember to check if it is working well or if it is worn out after some usage.

Do you put water in a Lookah? ›

Add a small amount of water to the glass chamber, just enough to cover the percolation holes. Replace the magnetic top, line up the Lookah wording with the power button, ensuring it is correctly in place. You can insert the silicone mouthpiece into the top of the glass to reduce any chance of splashback (optional).

Can I put water in my Lookah dragon egg? ›

How to use the Dragon Egg. First, you need to load some water into the chamber. Unscrew the clear part at the bottom and fill it with water about 1/3 of the way. Flip open the magnetic cap and put a tiny amount of concentrate in the chamber; make sure you place it in the center of the quartz plate, not the side.

How much water do you put in a Lookah bong? ›

Fill only the base of the bong till the downstem is just covered by water. This way, the smoke has to go through the water. Don't fill the bong up too high or you risk spilling bong water over your bud or yourself.

Top Articles
Latest Posts
Article information

Author: Fr. Dewey Fisher

Last Updated:

Views: 6203

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.